jeg har fundet lidt mere, her fra how to brew :
Metallic flavors are usually caused by unprotected metals dissolving into the wort but can also be caused by the hydrolysis of lipids in poorly stored malts. Iron and aluminum can cause metallic flavors leaching into the wort during the boil. The small amount could be considered to be nutritional if it weren't for the bad taste. Nicks and cracks ceramic coated steel pots are a common cause as are high iron levels in well water. Stainless steel pots will not contribute any metallic flavors. Aluminum pots usually won't cause metallic flavors unless the brewing water is alkaline with a pH level greater than 9. Shiny new aluminum pots will sometimes turn black when boiling water due to chlorine and carbonates in the water.
The protective (grayish) oxides of aluminum can be enhanced by heating the clean pot in a dry oven at 250°F for about 6 hours.
Og lidt fra
http://brewingtechniques.com/library/ba ... iller.html
ALUMINUM BREW POTS
Q: I would like to see an end to the stainless steel versus aluminum brew pot debate. No one has yet given hard evidence that an aluminum pot negatively affects beer. Is there any way that you could do a double-blind trial? Most brewers aren't going to risk $100 on an aluminum kettle only to find that it makes bad beer.
DM: First of all, I would not pay $100 for an aluminum kettle. For that kind of money, I could get a stainless steel Sankey keg and have it modified to make a first-class kettle, with none of the doubts or disadvantages aluminum carries.
Okay, I ducked the question. I must try to answer it. I have investigated the use of aluminum in every brewing text I could lay hands on, including some very old ones. Regarding aluminum kettles, I came up dry. It seems the metal has never been considered for brew kettles until home brewers came along. I suspect the reasons for this are purely practical. Kettles are the hardest of all brewery vessels to clean, and strong chemical cleaners corrode aluminum. Caustic soda literally eats it up. It is soft enough that hand scrubbing with wire brushes will scratch it badly, which in turn will make the surface harder to clean the next time around. It is no wonder that commercial brewers apparently never considered using it for brewhouse vessels.
On the other hand, there was a time before World War II and even afterwards when aluminum was seriously considered and sometimes used for fermentation tanks. These were the days before CIP (clean in place) caught on, and open fermentors were popular. These tanks had to be cleaned by hand, and aluminum actually had certain advantages over glass-lined steel and pitch-coated wood, which were other common materials. None of the brewing experts of that era, as far as I can determine, noted any kind of metallic taste in beer fermented in aluminum.
Another interesting fact: Although copper was always the metal of choice for brew kettles, iron was used for brew kettles and lauter tuns back in the old days (1800s and earlier), and authorities as recent as Jean de Clerck seriously discuss the use of this material. I myself have seen mild steel rakes in a two-vessel German decoction brewhouse built in the 1930s.
After seeing those rakes, I decided not to replace my old enamelware brew kettle when it started to pit. As far as I could determine, use of the pitted kettle did not cause a metallic taste or haze in my home brews. However, I never tried an aluminum kettle, and I cannot speak positively about it. I can admit to growing doubts about the deleterious effects of aluminum, but the conventional wisdom, questionable as it is, needs to be tested before being thrown out. Any home brewers out there with an aluminum kettle on hand who would be willing to make the experiment?
Meanwhile, my advice to anybody putting together a home brewing setup remains: Copper and stainless are the best materials for a brew kettle. Enamelware works, though it is harder to clean than copper or stainless; it is even cheaper than aluminum. I see no reason to buy an aluminum kettle for home brewing.
Jens